ZS series vibrating screen

ZS series vibrating screenProduct Overview

The ZS series vibrating screening machinery has low noise, high efficiency, and only requires 3-5 minutes to quickly change the screen. It has a fully enclosed structure and is suitable for screening and filtering materials such as particles, powders, and liquids.

The rotary vibrating screen (circular vibrating screen) uses an upright motor as the excitation source, and eccentric weights are installed at the upper and lower ends of the motor. The rotational motion of the motor is transformed into horizontal, vertical, and inclined three-dimensional motion, and then transmitted to the screen surface. Adjusting the phase angle between the upper and lower ends can change the motion trajectory of the material on the screen surface.

1. High efficiency, exquisite and durable design, can sieve any powder or mucus.

2. Easy to change the network, simple to operate, and easy to clean.

3. The mesh is not blocked, the powder does not fly, and it can be sieved up to 500 mesh or 0.028mm.

4. Impurities and coarse materials are automatically discharged and can be operated continuously.

5. Special grid design, the screen has a long service life and can be replaced quickly, taking only 3-5 minutes.

6. Small size, space saving, and easy to move.

7. The screening machine can be stacked up to five layers, and it is recommended to use three layers.

ZS series vibrating screendetailed description

The three-dimensional rotary vibrating screen uses an upright motor as the excitation source, and eccentric weights are installed at the upper and lower ends of the motor to convert the motor's rotational motion into horizontal, vertical, and inclined three-dimensional motion. This motion is then transmitted to the screen surface, causing the material to undergo outward expansion involute motion on the screen surface. Therefore, this series of vibrating screens is called rotary vibrating screens. The rotary vibrating screen has the advantages of long material trajectory and high utilization rate of the screen surface. Adjusting the phase angle of the upper and lower heavy hammers can change the motion trajectory of the material on the screen surface Materials can be subjected to precision screening, probability screening, and other methods.