Clean clothing low-temperature drying ozone sterilization cabinet

DCYProduct Introduction of Series Multi functional Clean Clothes Low temperature Ozone Sterilization Cabinet

This series is multifunctionalSuitable for industries such as food, pharmaceuticals, and healthcare, it can be used for ozone disinfection and sterilization of molds, raw materials, packaging materials, work clothes, containers, appliances, etc. It can also replace UV lamp irradiation and high temperature and high pressure disinfection for secondary pollution.The DCY series ozone sterilization cabinet (transfer window) is an innovative product developed by our Tengyang company with independent intellectual property rights, with obvious technological advantages.Clean clothing low-temperature drying ozone sterilization cabinet

（1） Multi functional ozone sterilization cabinet, clean clothing, low-temperature ozone sterilization cabinetproductClassification and Characteristics

1Laminar flow type (TY-D):Double layer stainless steel plate design, built-in circulating fan and double-layer air duct, using laminar and convective ozone gas to circulate evenly in the sterilization cabinet cavity, with ozone concentration>200ppm, avoiding sterilization dead corners and achieving room temperature disinfection and sterilization effect.

2Low temperature drying type (DCY):Three layer stainless steel plate design, combined with laminar flow characteristics, utilizes insulation layer and constant temperature drying control system to achieve low-temperature drying function, eliminating the drawbacks of high-temperature disinfection. All ozone sterilization cabinets mentioned above can be designed with double door transfer windows. Used for the transfer of items between cleanrooms of different levels, ozone sterilization of items is carried out in a short period of time.

（2） Sterilization and drying cycle

It utilizes the strong oxidizing properties of oxygen atoms to directly penetrate the cell membrane, achieving the effect of physical lysis. It can kill various bacteria, spores, and heat sources, has * sterilization and antibacterial functions, and is environmentally friendly.

Ozone sterilization is completed instantly from the moment of contact on the surface. In order to achieve sterilization of items, time needs to be comprehensively considered based on the type, placement form, and complexity of the items. The sterilization cycle for workwear items is usually set to 30 minutes, for tools and instruments it is set to 25 minutes, and for raw materials it is set to 40 minutes. The sterilization rate can reach 99%, but it needs to be determined through actual sterilization effect and test results.

The time for low-temperature drying needs to be determined based on the moisture content of the items. Generally, the drying time for the clothes after being spin dried by the washing machine is 30 minutes, while the drying time for other items is determined according to the actual situation.

In summary, for various items, the cycle of ozone sterilization and low-temperature drying should be completed within 50-90 minutes.

(3)Clean clothing low-temperature drying ozone sterilization cabinetselection

1Customer demand

(1) Items to be sterilized: workwear and equipment

(2) Sterilization production: 20-30 pieces/batch

(3) Form: Single door low-temperature drying ozone sterilization cabinet

2Ozone sterilization system

Using high-quality small-sized enamel dielectric ozone discharge cells, the ozone generation unit does not require water cooling, has low temperature rise, high concentration, and a balanced ozone concentration of>200ppm. The sterilization effect and equipment stability are greatly improved, and the service life is up to 20000 hours, replacing the traditional vacuum glass tube ozone generation unit. It is a new generation of advanced products.Using the technique of internal circulation of air flow, the gas inside the chamber is input into the ozone generation unit through an internal circulation fan and a filter. After outputting clean ozone gas, it is refilled into the chamber and accumulated through internal circulation to rapidly increase the concentration of ozone per unit time. Ozone gas is evenly distributed, fully utilizing the ability of ozone permeation sterilization to avoid sterilization blind spots.

3Low temperature drying system

Built in all stainless steel circulation blower, positioning device, electric heater, filter mesh, hygienic and corrosion-resistant; Manual dehumidification makes low-temperature drying more efficient and safe.

Working temperature 60-70℃, using an intelligent micro electric temperature controller with digital display indication, adjustable temperature, temperature control, sensitive response, small temperature difference, and uniform heating characteristics.

Both the inlet and outlet are equipped with air valve devices to ensure clean hot air. Equipped with an air purification system, it effectively avoids external pollution of the interior through the air inlet and outlet during drying operations.

The advantage lies in the low-temperature drying of semi humid items to be disinfected without being moved, which is convenient to operate and can reduce secondary pollution of the items.

The sealing components are all made of high-temperature silicone rubber sealing strips, which are resistant to high temperatures and corrosion.

4Cabinet body

Adopting a fully SUS304 three-layer stainless steel structure. The cabinet structure adopts an assembled combination form, which is divided into ozone sterilization chamber, insulation layer, convection duct, control room, and ozone generator. The fine welding process has no visible welding points on the inner and outer surfaces, good sealing performance, strong elastic recovery performance, insulation, and ensures no ozone leakage.

5Control

The electronic control system adopts automatic program control, and drying and sterilization are automatically completed according to the program, which is easy to operate and truly realizes automated work.

6Technical parameters