High precision 10 channel injection pump

NegotiableUpdate on 05/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief introduction: The high-precision 10 channel infusion pump is a 10 channel infusion/extraction type infusion pump mainly used in biological laboratories, with an integrated structure. The high-precision 10 channel injection pump can accommodate syringes (samplers) of different specifications, suitable for high-precision and small flow night body transmission.

Product Details

Details introduction:

The main functions of the high-precision 10 channel injection pump are:

1. Syringe inner diameter input function: You can select syringes from a list or directly input the syringe inner diameter

2. The microinjection pump has a user-friendly human-machine interface: a large screen LCD display, digital knobs combined with thin film buttons for easy and fast operation.

3. Four working modes: infusion mode, extraction mode, extraction infusion mode, and continuous mode.

4. Power off memory function: (1) EEPROM saves the set parameters, and there is no need to reset them after powering on again. (2) When running in streaming mode, power is cut off, and after power is restored, it can continue to run or stop according to the set parameters.

5. Traffic jam protection function: When the propulsion mechanism of the infusion pump is blocked during operation, the infusion pump will stop the operation of the propulsion mechanism and sound a whistle alarm.

6. The 485 communication bus can be connected to the upper computer and controlled through backend software.

7. External control interface: equipped with input/output control function. Flow calibration function: More accurate flow can be obtained through the calibration program. Syringe protection function: By adjusting the position of the limit block, the syringe can be prevented from being damaged

Technical parameters of high-precision 10 channel injection pump:

Working mode of microinjection pump	pour into
Flow range	0.831ul/min to 21.675ml/min
Number of syringes that can be installed	10
Max's itinerary	140mm
Travel resolution	0.156µm
Linear velocity range	5 µ m/min-130mm/min (flow rate=linear velocity x injector area)
Linear velocity adjustment resolution	5µm/min
Travel control accuracy	Error ≤± 0.5% (when the stroke is ≥ 30% of the maximum stroke)
Rated linear thrust	＞180Ｎ
Syringe selection	Main manufacturers and models of syringes are available for selection
Definition of Syringe	Can directly input the inner diameter of the syringe
Flow correction	Obtain more accurate liquid volume through calibration program
Run parameter settings	Distribution volume, injection time, etc
Display parameter selection	Liquid volume, flow rate or linear velocity
Power off memory	After powering on again, you can choose whether to continue working in the disconnected state
Status signal output	2-channel OC gate signal output, used to indicate start/stop and direction status
Control signal input	2-channel start/stop control input, 1-channel falling edge trigger signal controls start/stop; 1-channel TTL level signal controls start stop
communication interface	RS485
External dimensions	280×210×140(mm)
weight	4.5kg
Use power supply	AC
200V-260V/35W	Relative humidity of working environment
＜80%	Ambient Temperature

0℃- 40℃