Laboratory side platform

Laboratory side platformCustomized customization

The laboratory involves a lot of content in the entire design plan, including equipment and instruments, storage, furniture storage, hygiene requirements, fire prevention requirements, and so on. In laboratory design, it is necessary to understand the size parameters of laboratory furniture andLaboratory side platformThe design pattern. The commonly used design patterns include island, peninsula, L-shaped, U-shaped, straight, etc. Island is a common pattern, often used in large spaces, with a long square interior form. The characteristic of this pattern is smoothness. Peninsula type is also a typical application method, suitable for narrow and elongated environments. When designing a chemistry laboratory, it is generally necessary to install a central experimental platform that can be operated from both sides in the center of the laboratory, and to install experimental platforms, testing platforms, fume hoods, cabinets, drying cabinets, etc. in the surrounding areas. Purification stations are also required to increase the space for use in the laboratory as much as possible.

The demand for electrical energy from laboratory instruments, facilities, and air conditioning equipment (approximately 100kWh/m2a of disposable energy). The total amount of disposable energy obtained is. This value is already three times higher than the prescribed value in passive building standards; Although it is assumed that centralized heating has been adopted here.

Therefore, it does not consume any form of disposable energy. In practice, it is usually assumed that the heating demand of passive buildings is 20kWh/m2a. In order to make the comparison and estimation closer to reality, this data can also be adopted.

Due to the failure to effectively avoid safety hazards, some laboratories may suffer significant losses from accidental incidents, such as laboratory fires caused by electrical short circuits, resulting in damage to equipment on the same circuit; Due to the rupture of the water supply pipeline, the laboratory was flooded; Due to power outage or refrigerator malfunction, the storage temperature of the reagent is too high and it deteriorates; The inspection work was interrupted due to the difficulty of maintenance caused by mice biting the equipment circuit. Therefore, in addition to ensuring regular safety, it is important to focus on improving circuit capacity, power outage protection, fire-resistant materials, automatic fire extinguishing devices, and equipment to prevent rodents from entering. In recent years, due to the rapid development, the number of patients seeking medical treatment has continued to increase, which has also led to an increase in the number of test samples. However, the laboratory did not anticipate future development at the beginning of its design, resulting in existing equipment and facilities not matching the actual demand, and many had to adjust other spaces for the laboratory department. And this follow-up solution.