Single workstation double-sided laboratory glove box

NegotiableUpdate on 05/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief introduction: A glove box is a device that provides an anhydrous and anaerobic environment. The device mainly consists of a display system, a transition chamber, a vacuum system, a control system, a box body, a circulating purification and regeneration system, and can also be integrated with gas purification system, solvent filtration system, and water oxygen display system. The box is made of high-quality steel plate or mirror stainless steel argon arc welded, with double-layer tempered glass. Beautiful and innovative, with stable performance.

Product Details

Details introduction:

Specification
1Box body
1.1. Dimensions: 1200mm (length) x 900mm (height) x 1000mm (width)
1.2. Material: All stainless steel structure (Type 304), thickness 3mm
1.3. Filter: Pore size 3 microns
1.4. Gloves: Glove opening 8 inches, thickness 0.4mm butyl gloves, hard aluminum alloy glove opening (treated with anti-corrosion and anodized aluminum), caliber 220mm.
1.5. Window: Operating surface with tilted design, detachable 8mm safety tempered glass front window, wear-resistant, corrosion-resistant, good transparency, sealing ring using 3/8-inch thick OMEGA sealing ring
1.6. It can maintain a certain positive and negative pressure (-10mbar~10mbar) during use
1.7. The box is equipped with anti reflective energy-saving lamps for soft lighting.
1.8. The box is equipped with a double-layer display board inside
1.9. The box is equipped with a porous power terminal block (power supply: 220V ± 10% 50Hz ± 10%)
2Transition cabin
2.1. Shape: cylindrical (304 stainless steel), connected to glove box, controlled by valve
2.2. Size: 360mm diameter, 600mm long large transition chamber, piston door, sliding tray inside the transition chamber, polished, automatic valve control for air extraction and replenishment. The box is equipped with a small transition compartment with a diameter of 150mm and a length of 300mm, which is manually controlled by valves for air extraction and replenishment.
2.3. Tray: Stainless steel 300mm × 450mm, freely movable and extendable (large transition compartment configuration)
2.4. Vacuum degree ≤ 1 bar (both large and small right transition compartments require vacuum strip display)
3Control system
3.1. Method: including self diagnosis, power-off self starting characteristics, with pressure control and adaptive functions. LCD display is used for automatic control, loop control, password protection, and vacuum chamber control. The unit control adopts Siemens PLC touch screen.
3.2. Pressure control: Control the pressure of the control box and transition chamber at a certain set value.
3.3. Foot pedal: It can control the pressure of the glove box and is convenient to operate.