Spices food grade multifunctional V-shaped mixer

detailed description

1V-type mixer with forced mixing functionpurpose

All stainless steelV-type mixer is a mixing equipment for dry powder or granular materials in the pharmaceutical industry and other industries. It is widely used in industries such as chemical, pharmaceutical, food, plastic, cosmetics, ceramics, metallurgy, etc.

2、 Structural characteristics and performance

Spices food grade multifunctional V-shaped mixerDue to the unequal lengths of the two cylindrical tubes, an asymmetry is formed. When the mixer rotates, the material decomposes and combines, generating a lateral force due to different potential energies, which drives the material to undergo lateral communication. When the material decomposes and combines, there is also a lateral force due to the different planes of the material, which drives the material to undergo lateral communication. After another round of rotation, the lateral force is about25%The material flows from one cylinder to another in such a way that it mixes horizontally and radially, decomposes and combines, and intersects to achieve very uniform mixing of the material. During material mixing, there is no mechanical compression or strong wear, which can maintain the integrity of the material particles, facilitate discharge, and facilitate cleaning during product replacement. Mixing in a closed state provides good conditions for dust-free operation.

IIISpices food grade multifunctional V-shaped mixerMain technical parameters

4Outline structure diagram

FivePrecautions for use

1. After the equipment is in place, according to the flatness of the ground, uneven ones can be cushioned with rubber pads on the four foot pads of the mixer (which our factory has prepared), and the power supply should be connected according to the conventional three-phase four wire system for equipment electricity,Before starting, check if all components are installed correctly, and then check if all fasteners are loose. Connect the main power supply andGrounding protection wire.
2. The feeding amount should not exceed the normal volume. Before feeding, close the bottom butterfly valve and cover the feeding port after feeding, （Attention: The pressure rod on the cover should be perpendicular to the front of the machine, otherwise it may damage the pressure rod and screw,Lock it tightly to prevent material leakage during operation.
3. Turn on the power switch button, and the power indicator light will turn on.
4. Set the required time for forward mixing on the time relay, and the machine will automatically stop when the time is up,.Forward and reverse are controlled at the same time.
5. Turn your hand to the right againOn, that is, the machine is running, and it will automatically stop when the set time is up. If it needs to be reversed, you can manually turn it back on, that is, the machine is running,startmixWhen the mixing time is up, it will automatically shut downIf the direction of the discharge port is not correct during discharge, you can press the jog button to stop the discharge port at the appropriate position, and then close the main valveUnloading and loading of power supply.
6. The main current of the machine cannot exceed the rated current of the motor during operation.

5. Non electricians are prohibited from carrying out live repairs.

6. This equipment adopts 380V+N50H_ZThree phase five wire system circuit.

7. It is prohibited to start both forward and reverse directions simultaneously.

8. The reducer of this equipment needs to be refueled and replaced with oil according to routine mechanical maintenance.