Stainless steel vacuum mixing tank mixing equipment manufacturer non-standard customization

Stainless steel vacuum mixing tanks can withstand certain negative pressure and can achieve functions such as vacuum feeding, vacuum dehydration and solvent removal, and vacuum negative pressure degassing. The design of the mixing tank should meet the requirements of not deforming the tank body under vacuum conditions and meeting usage requirements.

1、 Definition:

Stainless steel vacuum mixing tank refers to a mixing tank with vacuum feeding or discharging function. Vacuum mixing tanks, due to their ability to withstand negative pressure, have thicker walls compared to regular mixing tanks, while vacuum mixing tanks with jacket steam heating have thicker walls and belong to pressure vessels.

2、 Composition:

Compared with ordinary mixing tanks, stainless steel vacuum mixing tanks are composed of mixing tanks, upper and lower heads, mixers, supports, transmission devices, shaft sealing devices, vacuum gauge ports, vacuum ports, etc. They can also be equipped with jackets for steam heating or other liquid level and flow measurement devices.

3、 Function:

It has functions such as heating, cooling, insulation, stirring, and metering, and is widely used in industries such as coatings, pharmaceuticals, building materials, chemicals, and food. The vacuum mixing tank is equipped with a cooling device for vacuum pressure reduction mixing reaction. Some substances evaporate quickly in a vacuum state and will not be damaged by high temperature and pressure.

4、 Technical parameter table:

5、 Usage and maintenance:

1. It should be operated strictly according to the working pressure and temperature marked on the product nameplate to avoid danger.

2. Strictly follow the regulations on cooling, oil injection, and other aspects in the product manual, and do a good job in equipment maintenance and upkeep.

3. Typical mixing tanks are mostly atmospheric pressure equipment, and should be operated according to the operating procedures of atmospheric pressure equipment.

4. According to different production processes such as dairy and pharmaceutical companies that require high hygiene standards, strict attention should be paid to the cleaning and daily maintenance of mixing tanks. The user manual for cleaning and maintenance of visible equipment.

5. After vacuuming, first open the vent valve and wait for the pressure inside the tank to drop to 0MPa before closing the vacuum control device to prevent material backflow.

6、 Equipment installation and debugging:

1. Please check if there are any serious damages or deformations to the equipment during transportation, and if there are any loose fasteners on the equipment.

2. If the vacuum mixing tank needs to be anchored, please use pre embedded anchor bolts to install the equipment horizontally on a solid foundation.

3. Please install equipment, electrical control devices, and accessories correctly under the guidance of professionals, and check whether the pipelines are unobstructed, whether the installed instruments are correct, and whether there is any damage. Before starting the device, please check whether there are any people or objects inside, outside, or around the device that may affect its normal operation to avoid danger.

4. After installation, please first conduct a few seconds of trial operation to ensure that there are no electrical short circuits or abnormal sounds before proceeding with a short-term trial run.

5. If the mixing tank is equipped with a mechanical seal, an appropriate amount of 10 or sewing machine oil must be injected into the lubrication groove of the machine seal before the main engine is started. For water-cooled mechanical seals, cooling water must be introduced into the cooling chamber of the machine seal to ensure good lubrication and cooling of the machine seal.

6. After the equipment is running normally, please check the bearing temperature, running stability, sealing, and whether the instruments are normal. Only after confirming that they are normal can the feeding operation be carried out.

Sanxi Group is a professional manufacturer【Stainless steel vacuum mixing tank】Manufacturer, integrating product research and development, engineering design, processing and manufacturing, and project installation, looking forward to working together with you!