Tilted sandwich pot - Electric heating equipment manufacturer - Non standard customization

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The tilted sandwich pot consists of a pot body and supporting legs. The pot body is a double-layer structure composed of an inner and outer spherical pot body, with steam heating introduced into the middle layer. There are fixed, tilting, stirring and other styles available. The sandwich pot has the characteristics of large heating area, high thermal efficiency, uniform heating, short boiling time of liquid material, easy temperature control, beautiful appearance, easy installation, convenient operation, safety and reliability. Sandwich pan is widely used in the processing of all kinds of food, and can also be used in large restaurants or canteens to cook soup, stew, porridge, etc. It is a good equipment for improving quality, shortening time, and improving working conditions in food processing.

Product Details

Structural form:

1. Divided by structural form: tilting sandwich pot, vertical (fixed) sandwich pot structure.

2. Divided by heating method: electric heating sandwich pot, steam heating sandwich pot, gas heating sandwich pot, electromagnetic heating sandwich pot.

3. Use mixing or non mixing equipment according to the process requirements.

4. Sandwich pots can be divided into three types according to sealing methods: uncovered type, flat lid type, and vacuum type.

Efficient heating:

The inclined sandwich pot uses steam at a certain pressure as the heat source (electric heating can also be used). The sandwich pot has the characteristics of large heating area, high thermal efficiency, uniform heating, short boiling time of liquid materials, and easy control of heating temperature.

Safe and convenient:

The inner pot body (inner pot) of the inclined sandwich pot is made of acid resistant and heat-resistant austenitic stainless steel, equipped with pressure gauges and safety valves. It has a beautiful appearance, easy installation, convenient operation, and is safe and reliable.

Technical Specifications:

Technical performance:

1、容积: 50L、100L、200L、300L、400L、500L、600L、800L、1000L。

2. Structural form: Divided into tilting and vertical structures, with or without stirring according to process requirements.

3. Pot body material: ① Inner pot body made of stainless steel (SUS304), jacket and bracket made of carbon steel (Q235-B) coated with anti rust paint on the outside; ② Both inside and outside are made of stainless steel.

4. Pot body with mixing device: top center mixing, reducer output shaft and mixing blade shaft are connected by a sleeve for easy disassembly and cleaning.

5. Mixing speed: 36r/min (a certain speed can be selected according to customer requirements); Mixing blade form: ordinary mixing (anchor type) and scraping bottom mixing.

6. Support foot form: ① Vertical pot body: triangular pyramid form, circular tube form; ② Tiltable pot body: groove shaped bracket type.

7. Equipment configuration: dial pointer thermometer, steam inlet, discharge port, etc. (vertical structure).

8. The tilting sandwich pot body can be tilted 90 degrees, and the tilting method is manual flipping.

Note: The working pressure, motor power, heating power, and mixing slurry structure of the jacket can be customized according to the customer's special requirements.

Installation steps:

1. Tighten the two fastening screws of the bracket, and when shaking the pot body, the inlet and outlet pipes at both ends are not allowed to rotate with the pot.

2. After installation, the stirred sandwich pot should undergo an empty test run inspection. It can only be put into operation after all transmission components are running normally.

3. After intake, if there is a leak at the joint, tighten the nut until there is no leakage.

Sanxi Group is a professional manufacturer of inclined sandwich pots, integrating product research and development, engineering design, processing and manufacturing, and project installation. We look forward to working together with you!